Tag Archives: grinding cylinders

1488–1497 P. Vaculik, L. Chladek, M. Prikryl, A. Smejtkova and P. Brany
The temperature changes of barley malt during its disintegration on a two roller mill
Abstract |
Full text PDF (383 KB)

The temperature changes of barley malt during its disintegration on a two roller mill

P. Vaculik*, L. Chladek, M. Prikryl, A. Smejtkova and P. Brany

Czech University of Life Sciences Prague, Faculty of Engineering, Department of Technological Equipment of Buildings, Kamýcká 129, CZ 165 21 Prague 6-Suchdol, Czech Republic; *Correspondence: vaculik@tf.czu.cz

Abstract:

This article discusses the change of temperature during disintegration on two roller mill. The production of barley and its treatment to malt is first step of beer brewing. The malt is the produced in malt plants. Crushing the malt is realized in only the brewery and is a core activity of brewing technology. This operation is performed both in craft breweries and in industrial brewery. This article therefore is focused on the theory of crashing solid phase with a respect of development of heat. Grinding barley malt is realised using mills of various designs or disintegrators. They are widely used mills with 2, 4, 5, 6 grinding cylinders. These roller mills are used in many other applications, not only in industrial food or drink production. For next treatment solid phase should be broken into smaller pieces (comminuted). The greater the extent of comminution, the large the surface area for impact on next treatment. The amount of mechanical energy converted to heat energy depends on the principle of the process disintegration and other parameters, i.e. distance of grinding gap, capacity, mechanical properties of crashing material etc. For these reasons, it is important to pay attention to the temperature change of barley malt during its disintegration on a mill.

Key words:

, , , ,