Tag Archives: VRS

749-757 J. Kadeřábek, V. Shapoval and P. Matějka
Evaluation of the RTK receiver’s capability of determination the accurate position
Abstract |
Full text PDF (745 KB)

Evaluation of the RTK receiver’s capability of determination the accurate position

J. Kadeřábek¹*, V. Shapoval¹ and P. Matějka²

¹Czech University of Life Sciences Prague, Faculty of Engineering, Department of Agricultural Machines, Kamýcká 129, CZ16500 Prague, Czech Republic
²Czech University of Life Sciences Prague, Faculty of Engineering, Department of Technological Equipment of Buildings, Kamýcká 129, CZ16500 Prague, Czech Republic
*Correspondence: jkaderabek@tf.czu.cz

Abstract:

The main aim of this experiment was to compare low-cost RTK receiver, that possible can be used for precise agricultural application, another that is currently used for these applications and the third one that suits for static measurement the most and gives the reference point for results comparison. The main idea of this research was to compare the measured positions during static measurement of RTK receivers. Were discovered that the receiver Trimble 750 was not able to work in fix mode (mode when the RTK receivers are capable to measure the most accurately) for the whole time. This fact affects the results from whole measurement and showed that errors were a little higher than producers specifies. The low-cost receiver u-Blox C94-M8P showed satisfying results when in most cases it was capable to solve the problem of ambiguity integer phases. The main parameters in this work that were counted and summarized were: accuracy, precision, RMS error, system status ratio and number of satellites.

Key words:

, , , , , , ,