Tag Archives: tar

1321-1331 V. Kirsanovs, A. ┼Żandeckis and C. Rochas
Biomass gasification thermodynamic model including tar and char
Abstract |
Full text PDF (297 kB)

Biomass gasification thermodynamic model including tar and char

V. Kirsanovs*, A. ┼Żandeckis and C. Rochas

Institute of Energy Systems and Environment, Riga Technical University, Azenes iela 12/1, LV-1048 Riga, Latvia
*Correspondence: vladimirs.kirsanovs@rtu.lv


Biomass gasification is a thermochemical process in which feedstock is heated to high temperatures in a condition of absence of oxygen. As a result, biomass is converted into the combustible syngas, which typically consists of carbon monoxide (CO), carbon dioxide (CO2), hydrogen (H2), methane (CH4), nitrogen (N2) and water vapour (H2O). Biomass gasification process simulation plays an important role in gasification process comprehension and optimization. Typically, gasification models have only one output flow in the process mass balance, which represents the amount of the produced syngas. Tar and char also are significant products of gasification process. This study presents a thermodynamic biomass gasification model. The fundamental distinction of the proposed model, comparing to other available models, is that tar and char also are taken into account in developed model. Gasification process is affected by many factors. Similarly, the amount of produced tar and char can significantly vary depending on gasifier operation conditions. Literature review on the previous studies is done to determinate the most critical factors which affect tar and char formation. Results show that temperature in the gasifier, equivalence ratio and fuel properties have dominant effect on the products yield. Two regression models are elaborated to present the amount of the produced tar and char depending on independent variables. The achieved mathematical equations are added to the developed thermodynamic model of the gasification process. Biomass gasification process is simulated with different values of fuel moisture and equivalence ratio. The results show that produced syngas amount, calorific value and biomass energy conversion efficiency are more realistic after tar and char including in the model.

Key words:

, , , ,