Tag Archives: thermometer

700–706 J. Hart, and V. Hartová
The next generation of multiple temperature sensor
Abstract |
Full text PDF (281 kB)

The next generation of multiple temperature sensor

J. Hart¹,* and V. Hartová²

¹ Czech University of Life Sciences Prague (CULS), Faculty of Engineering, Department of Technological Equipment of Buildings, Kamýcká 129, CZ165 21 Prague, Czech Republic
² Czech University of Life Sciences Prague (CULS), Faculty of Engineering, Department of Vehicles and Ground Transport, Kamýcká 129, CZ165 21 Prague, Czech Republic
*Correspondence: janhart77@gmail.com

Abstract:

Long-term and short-term measurements of temperature at different depths in soil have always been very complicated. The solution that was used until now was measuring using soil thermometers. Measurements were done at shallow depths and generally only allowed for measuring of one temperature, and always at the one depth which was determined for the measurement (normally 5, 10, 20, 50, 100, 150 and 300 cm). These problems were relatively limiting and impractical. It was therefore necessary to devise an alternative for a simple and effective solution that would eliminate these disadvantages – it was necessary for a probe to allow temperature to be measured at different depths at one measuring point without having to change its position. A requirement simultaneously arose for the need to be able to measure temperatures at greater depths, and a multiple probe was therefore conceived consisting of a rod for dynamic penetration tests.

Key words:

, , , , ,