Tag Archives: yield mapping

1380-1385 F. Kumhála, J. Chyba, M. Pexa and J. Čedík
Measurement of mulcher power input in relation to yield
Abstract |
Full text PDF (317 kB)

Measurement of mulcher power input in relation to yield

F. Kumhála¹*, J. Chyba¹, M. Pexa¹ and J. Čedík²

¹Czech University of Life Sciences, Faculty of Engineering, Kamýcká 129, CZ 165 21 Prague-6 Suchdol, Czech Republic
²Research Institute of Agricultural Engineering, p.r.i., Drnovská 507, CZ 161 01 Prague-6, Czech Republic
*Correspondence: kumhala@tf.czu.cz

Abstract:

Mulching is one of relatively energy-demanding operations in plant production. That is why the knowledge of mulcher power input is very interesting and can be used e.g. for mulcher design improvement etc. Field experiments were arranged in order to measure mulcher power input also in relation to yield. The field of about 1.25 ha area was harvested by mulcher MZ6000 produced by BEDNAR FMT Co. This machine has three rotors with vertical axis, working width 6 m and was aggregated with JD 7930 tractor. Power input was measured by torque dynamometer Manner MFI 2500 placed at tractor PTO shaft. Measured data were processed by A/D converter Labjack U 6 and saved. After the harvest, the samples of harvested material from area 6 x 1.65 m were weighted by hands on 102 places in almost regular grid. Average measured mulcher power input was relatively high, 76 kW, with peaks reaching up 145 kW. The yield of harvested material on experimental field was very unbalanced and varied from 0.6 to 13 tonnes per hectare. The amount of measured data allowed the creation of power input and yield maps. By comparing the results from power input and yield measurement it was found that power input significantly depended on the yield. Information of mulcher power input can be used also for harvested material yield mapping.

Key words:

, , ,