Tag Archives: Physical-and-chemical parameters of the fuel

862-887 H. Kaletnik, V. Mazur, I. Gunko, V. Ryaboshapka, V. Bulgakov, V. Raide, R. Ilves and J. Olt
Study on performance of compression engine operated by biodiesel fuel
Abstract |

Study on performance of compression engine operated by biodiesel fuel

H. Kaletnik¹, V. Mazur¹, I. Gunko¹, V. Ryaboshapka¹, V. Bulgakov², V. Raide³, R. Ilves³ and J. Olt³*

¹Vinnytsia National Agrarian University of Ukraine, 3 Soniachna Str., UA21008 Vinnytsia, Ukraine
²National University of Life and Environmental Sciences of Ukraine, Ukraine, 15 Heroyiv Oborony Str., UA 03041 Kyiv, Ukraine;
³Estonian University of Life Sciences, Institute of Technology, 56 Kreutzwaldi Str., EE 51006 Tartu, Estonia
*Correspondence: jyri.olt@emu.ee

Abstract:

The analysis of the performance of biofuel is aimed at evaluating the energy efficiency of operating the engine with the use of biodiesel fuel as function of the fuel’s composition and other physical-and-chemical parameters. The mathematical models and analysis techniques known to the authors do not take into account the effect that the use of different bio-diesel fuels has on the operation of the engine and, therefore, need refinement in terms of the mathematical expressions and empirical formulae that describe the physical processes taking place in the engine’s cylinders. The aim of the study is to improve the mathematical relations taking into consideration the physical-and-chemical parameters of different types of fuel. The research methods proposed in the article are based on step-by-step consideration of the mathematical models of processes that follow each other, with due account for their possible overlapping, which jointly have an effect on the engine’s output indices. The boundary conditions and parameter increments are pre-set in electronic work sheets. Thus, it becomes possible, using the refined mathematical model, to calculate the main performance indices of the diesel engine with due account for the changes in the physical-and-chemical parameters of the fuel. The novelty of the described approach is in the possibility, through the use of the refined model and taking into account the data on the composition of the fuel and the design and operation parameters of the engine, to calculate the indices that allow evaluating the efficiency of use of specific fuels in the internal combustion engine under consideration. In results, formulas for the calculation of the effective power of the engine, fresh air charge density, excess air factor, effective specific fuel consumption and combustion pressure have been developed. Combustion pressure modelling and experimental data is presented.

Key words:

, , , ,