Digital elevation models as predictors of yield: Comparison of an UAV and other elevation data sources
¹Czech University of Life Sciences Prague, Faculty of Environmental Sciences, Department of Applied Geoinformatics and Spatial Planning, Kamýcká 129, CZ165 21 Prague, Czech Republic
²Czech University of Life Sciences Prague, Faculty of Engineering, Department of Machinery Utilization, Kamýcká 129, CZ165 21 Prague, Czech Republic
³Czech University of Life Sciences Prague, Faculty of Engineering, Department of Agricultural Machines, Kamýcká 129, CZ165 21 Prague, Czech Republic
*Correspondence: dmoravec@fzp.czu.cz
Abstract:
Topography usually plays an important role for yield variability assessment. This study provides insight into the use of surface models from different sources for agriculture purposes: unmanned aerial vehicle imagery, LiDAR data and elevation data acquired from a harvester. The dataset from an aerial vehicle was obtained in the form of ortho-mosaics and digital surface model using casual camera. The LiDAR data was provided by the State Administration of Land Surveying and Cadastre in the form of Digital Terrain Model of the 4th and 5th generation. The data of yield together with its coordinates were gained from a combine harvester in the form of a regular grid. Yield data was interpolated by kriging geostatistical method. Position data including an altitude was used for modelling the last digital surface model. All gained surface models were correlated with the spring barley yield. Results show correlation similarity across all tested models with the yield; no significant differences were sighted. Free available coarser scale data is able to predict a yield sufficiently. The study indicates less effectivity of using very detailed scale data sources due to its time-consumption or expensive data gathering and processing process.
Key words:
spatial resolution, structure from motion, Unmanned aerial vehicle