Tag Archives: wireless transmission

410-415 V. Hartová and J. Hart
Improvement of monitoring of cattle in outdoor enclosure using IQRF technology
Abstract |
Full text PDF (555 KB)

Improvement of monitoring of cattle in outdoor enclosure using IQRF technology

V. Hartová¹* and J. Hart²

¹Czech University of Life Sciences Prague, Faculty of Engineering, Department of Vehicles and Ground Transport, Kamýcká 129, CZ165 00 Prague, Czech Republic
²Czech University of Life Sciences Prague, Department of Technological Equipment of Buildings, Kamýcká 129, CZ165 00 Prague, Czech Republic
*Correspondence: nverca@seznam.cz

Abstract:

Monitoring of cattle in the outdoor enclosure is a very important issue. Currently, the increasingly stealing cows and other cattle from the pasture. For businesses that manage it, this is a very lossy business. For thieves, the electric fences, which are currently the most widespread, are easily surmountly. And the owner does not have a chance early on to learn the fact theft of cattle. For this reason, a system for monitoring cattle on outdoor enclosure using IQRF (intelligent local network topology) technology has been developed. We have been dealing with this issue for a long time and the biggest problem was the monitoring of only the inner part of the enclosure. Previously, there was an overlap of monitoring in the area beyond grazing. This problem has been solved by using a shielded base for mounting IQRF receivers.

Key words:

, , ,




1017-1024 J. Hart and V. Hartová
Testing of ISM band at remotes for unlocking vehicles
Abstract |

Testing of ISM band at remotes for unlocking vehicles

J. Hart¹* and V. Hartová²

¹Czech University of Life Sciences Prague, Faculty of Engineering, Department of Technological Equipment of Buildings, Kamýcká 129, CZ165 00 Prague, Czech Republic
²Czech University of Life Sciences Prague, Faculty of Engineering, Department of Vehicles and Ground Transport, Kamýcká 129, CZ165 00 Prague, Czech Republic
*Correspondence: janhart77@gmail.com

Abstract:

Every modern car has a remote control for wireless unlocking. Wireless drivers for unlocking the vehicle using frequency in the ISM bands. ISM bands are unlicensed bands. They are usually used for industrial, medical and scientific purposes. The question is whether wireless transmission parameters are sufficient and do not violate defined range of ISM band. Another important aspect is the security of the wireless transmissions and any other signal interference. The problem of interference plays an important role in ensuring the quality and safety of wireless communications, especially when wireless networks can be found everywhere. The issues of remote control vehicles is very important due to the resulting security of a guarded vehicle. One of the major risks that may occur are data transmission that the signal is blocked by another signal and the end user does not notice. In this case, does not lock the vehicle nor ensuring its securing security system. Tests which were performed accurately determined the bandwidth of broadcast remote control for each vehicle. Vehicles for which the tests were conducted are standard vehicles used to frequent occurrence. These are the following types: Alfa Romeo, Hyundai, Mercedes, Škoda and Toyota. Subsequently, the analysis was performed of transmission compared with standard broadcast of jammers. All test drivers worked in the band ISM433. These tests clearly demonstrated that not every manufacturer strictly observes ranges of ISM band. This may affect traffic on surrounding licensed bands.

Key words:

, , , ,